Sabtu, 30 Juli 2016

Down To The Finishing Off Jobs

Forgive me readers for I have sinned. Its been nearly a month since my last blog.  I am now just doing the last few little jobs that have been hanging around.

I had the final bit of skirting board made by DW Wood Mouldings and fitted them along with the final bits of plinth.

Same both sides

I have fitted the rear door vents.

 16g SS special order, nice and thick

Still need varnishing

I have fitted the front button.

Ready for some bumping now ;-)

And finally Ive fitted a warning LED to the dash to confirm the alternator parallelling is locked in.


A horrible job which I didnt photograph was the removal of a spill of 2.5L of tar paint in the chain locker.  I decided it would be better to let it dry then use a hot air gun to melt it into manageable slices.  It worked but took about an hour and the last bits in the corners was a real job.

I have decided to move the inverter inside under the rear stairs.  I have had a couple of comments about it and I was a little unsure if it was a good idea when I decided to put it in the engine room  I will probably do this next week.

Related Posts by Categories

0 komentar:

Posting Komentar